Double Glazed Door Lock Replacement
Double-glazed door locks can appear like a daunting job, but with the proper tools and step-by guideline, it's manageable. Replacing a window lock can help provide extra security and improve your home or business's overall energy efficiency.
Begin by removing a screw that holds the faceplate of the lock cylinder. Utilizing a screwdriver, turn the cylinder to the left.
Replacement Cylinders
Euro lock door cylinders or barrel locks can be found in almost all uPVC double glazed uPVC doors. They provide security and dependability and have been verified to function. A cylinder might require replacement due to a stolen or lost key, but it can also be due to corrosion and aging. Cylinders are available in various sizes and styles to match your door. Depending on the requirements of your home, you can select between 3-star and 1-star cylinders. The cylinders are protected by BSI Kitemarks that are accepted for insurance.
Cylinder locks are a basic pin and barrel system that has been utilized in uPVC door for many years. The drawback of these locks however, is that burglars could easily manipulate them with tools that allow them to "snap", and gain entry into the home. We suggest that you replace your cylinders with snap-resistant ones in order to protect yourself from this common burglary method.
To remove the old cylinder first of all open the door and locate the screw at the edge of the door, between the handle on the outside and the inside handle. The screw is usually a different color and will stand out among the other screws. This screw can be removed completely using a screwdriver. If the screw won't budge then try applying some 3 in 1 type oil and leave it for a few hours or so. This could help, or you can chisel the head of the screw in the direction of 'unscrew' to break it loose.
After removing the screws for the handle, loosen the cylinder by turning it either way (the direction will differ based on the side of the door the locking mechanism is situated). Once the cylinder is loose move it towards you and remove it. Measure the cylinder's width and length prior to purchasing an alternative.
We have a range of half and full cylinders, as well as a variety of security cylinders rated both for anti-snap resistance and anti-bump. These cylinders are BSI kitemarked, Secured by Design accredited and provide high levels of physical security for your home.
Replacement handles
There are many colours and styles to choose from when replacing handles on a uPVC door. The most important thing to keep in mind is that the handle should fit properly. Both the screw size and keyhole size must be the same. Use our guide to determine the measurements of uPVC handles. This will ensure you get the correct measurements and purchase the right handle. Upgrade to the highest-security handles. This will increase the security of your door and can help keep potential thieves from being able to open the lock on your uPVC front doors.
Most major uPVC handle manufacturers will offer handles that can be used in replacement for double-glazed doors. You can find a huge selection of lever and handles in various finishes from companies such as ERA, Avocet and Millenco. You can choose the lever handle with a snib for additional security.
Depending on the needs of your business, you may need to replace the whole handle, or just the lever. This is often due to wear and tear, but can also be caused by an issue with the mechanism of your lock. If your lock mechanism is malfunctioning it is recommended to call a Locksmith. If you're only looking to replace the handle of the lock, you are able to do it yourself.
After repairmywindowsanddoors 've measured your measurements, you can begin to compare them to the sizes of the replacement handles on the market. The most commonly used size is the 92pz handle, but there are also 70pz and 68pz handles available for uPVC doors. You should also make sure that the new handle has a faceplate and backset that are compatible with your existing one. This will ensure that the screw holes align properly and won't harm the lock inside the door.
If you're replacing the handles on your doors and wish to upgrade to a greater security level, then it's recommended that you consider Sold Secure SS301 or 2* Kitemark set of handles. These are a good choice because they're approved by the police and have an exclusive anti-drill and anti-pick features.
Faceplates for replacement
Door keeps and faceplates are the last line of defence against intruders They tell any would-be burglar that your home is secure thus stopping them in their tracks. They are important and should be purchased at a trusted hardware shop, whether in person or online. This will ensure you get a sturdy device that will shield your windows and doors from damage and corrosion over time.
It is crucial to understand the distinction between a single-point uPVC locking system and multipoint uPVC one. They could be as different as apples and oranges. Based on the lock you are installing you will need to choose the appropriate faceplate and backset, a backset is the distance between edge of the door and centre of the handle or cylinder, and a 'faceplate' is a metal strip that is used to cover edges of the mechanisms. These are the primary elements that determine the replacement parts you need for your new uPVC locking system. It's a process of following the directions on how to install them!
Replacement locks
Depending on the style you prefer there are many options when it comes time to replace the locks on your uPVC doors. They are generally designed to withstand the force and provide enhanced security for your home. There are uPVC multipoint locking systems designed for commercial use. They are typically manufactured by reputable companies like Fullex central door lock gearboxes and Gardinia uPVC doors locks.
When you are choosing a replacement lock for your window, it is important to be aware of the kind of backset you require as well as the faceplate you require. To ensure that the lock is safe and secure and will fit correctly ensure that it matches these. If your lock has a 35mm spindle and a backset of 35mm, it is advisable to purchase a new uPVC handle with a gearbox that fits with the Laird Saracen surelock.
Also, ensure that the new lock you choose matches the dimensions of the handle hole and faceplate of your windows. This is vital to ensure a seamless integration of the handle and window lock.
Install the new lock in your window once you've selected the right one. It is a good idea to speak with your local locksmith when you are doing this. They will be able to assist you in choosing the correct lock. It is also advisable to test the new lock.
To prevent this from happening, you should replace your double-glazed windows with a lock of high-quality that is resistant to forced entry. This will secure your valuables and keep you family members safe from burglars. Replacing window locks will improve the security of your home at a a reasonable price. However this process isn't easy for those who aren't comfortable with it. In order to complete the task with ease, you should adhere to these steps with care.